Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Dacia
  4. :
  5. Duster
  6. : How to reset the tire pressure warning light in the Dacia Duster?

Dacia Duster - Video tutorial

Model: Dacia Duster HS, MK 1 - Years 2010-2017
Part: Tires
Operation: How to reset the tire pressure warning light in the Dacia Duster?

Resetting the tire pressure light in the Dacia Duster is an extremely simple and quick operation, let's see how to proceed in this tutorial. This procedure should only be followed after restoring the correct pressure of each tire following the instructions in the manual. Let's start by going inside the cabin and turning on the instrument panel, then scroll through the various screens of the display with quick presses of the button located at the end of the right lever. Once we reach the "Reset TP" option, hold down the same button for the necessary time until the light disappears completely.


Posted on 21 July 2023 by ScegliAuto



Reset tire pressure warning light Dacia Duster
Dacia Duster (2017-2024 / HM, MK 2) In this short video tutorial we will see how to reset the tire pressure warning light on a second series Dacia Duster. Obviously, before being able t
How to reset the tire pressure warning light on a Dacia Duster
Dacia Duster (2017-2024 / HM, MK 2) Before starting, we will have to sit in the driver's seat of our Dacia Duster. Let's start by activating the instrument panel by pressing the ignitio
How to reset the "Tire Pressure" warning light on a Dacia Duster
Dacia Duster (2010-2017 / HS, MK 1) Before starting, we will have to sit in the driver's seat of our Dacia Duster. Let's start then by going to start the engine of the car, turning the

    Frequently Asked Questions

    • Duster 2017-2024 - How do you reset the tire warning light, in the Dacia Duster 2022? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos