Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure on a Duster

Model: Dacia Duster MK 1, HS - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Tire pressure warning light

See other generations:
Video tutorial

This video shows the procedure to reset the tyre pressure light on a Dacia Duster. To reset the light, turn on the ignition without starting the engine, then use the button on the side of the lever on the right to navigate to the set TP option.

Once on the set TP menu, press and hold the button; the light will start to flash and then return to a steady state. When the light stops flashing, it means the reset was successful.

At this point, you can start the ignition to check that the light is no longer present on the dashboard.


Updated on 24 September 2026 by ScegliAuto


Related tutorials

How to reset the tire pressure warning light on the Dacia Duster
How to reset the tire pressure warning light on the Dacia Duster
Dacia Duster (2024-2026 / P1310) Today's instructions will allow us to reset the tire pressure warning light of the Dacia Duster; before performing the reset of the TPMS sensors, it …
How to reset the tire pressure warning light of the Dacia Duster
How to reset the tire pressure warning light of the Dacia Duster
Dacia Duster (2017-2024 / HM, MK 2) Today we will see the necessary instructions in order to reset the tire pressure warning light of the Dacia Duster. First of all, we get on board the…
How to Reset the Tyre Pressure Warning Light (TPMS) on the Dacia Duster
How to Reset the Tyre Pressure Warning Light (TPMS) on the Dacia Duster
Dacia Duster (2017-2024 / HM, MK 2) Below are the instructions on how to reset the tyre pressure warning light on the Dacia Duster; before performing the TPMS reset, ensure all four tyr…

    Frequently Asked Questions

    • Duster 2017-2024 - How to reset Dacia Duster tire pressure warning light? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos