Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dacia
    3. :
  3. Logan
    4. : Replacement of the radio fuse of the Dacia Logan MK2

Dacia Logan - Video tutorial

Model: Dacia Logan MK 2 - Years 2012-2022
Part: Car stereo
Operation: Replacement of the radio fuse of the Dacia Logan MK2

If the car radio of the Dacia Logan suddenly stops working, it is probably due to the protective fuse that has intervened following an extra voltage. To check it, we open the panel covering the fuse box located in the side section of the dashboard. Next to the steering wheel, normally covered by the closed door. To identify the fuse in question, we consult the diagram in the owner's manual, in our case the third from the bottom, in the right row. Using the provided pliers, we remove it and replace it with a new one of similar amperage.


Posted on 28 April 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Logan 2012-2022 - How to get the unlock code for a 2015 Logan car radio? Read Answer
    • Logan 2012-2022 - How to unlock the car radio on Dacia Logan? Read Answer
    • Logan 2012-2022 - What is the Dacia Logan multifunction car radio unlock code? Read Answer
    • Logan 2012-2022 - Where can the unlock code of the Dacia Logan mcv car radio be retrieved? Read Answer
    • Logan 2004-2012 - How do I enter the Dacia Logan's security code? Read Answer
    • Logan 2012-2022 - Where is the security code for the Renault Logan radio? Read Answer
    • Logan 2012-2022 - How do you find the security code of the Dacia Logan? Read Answer
    • Logan 2012-2022 - How do I enter the radio security code in the Dacia Logan? Read Answer
    • Logan 2012-2022 - What is the Dacia Logan car radio unlock code? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos