Do it yourself
| ||||
|
Dacia Sandero - Video tutorial
Model: Dacia Sandero
MK 3
- Years 2021-2024 In order to install the roof bars of the Dacia Sandero Stepway, you must first loosen the screws that secure the longitudinal bars: these will be located at the two ends of the respective bars. Once the screws have been removed, it will be possible to also remove the longitudinal bars from their housing: by doing so, the roof bars can be inserted into the same housings as the longitudinal bars. In this way, they can be secured with the respective screws to ensure that they can carry objects while remaining fixed on the roof.
Posted on 3 May 2024 by ScegliAuto
|
Handbrake adjustment on Ford EcosportFirst remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.007
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |