Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the fuel pressure sensor on a Dacia Logan vehicle

Model: Dacia Logan MK 2 - Years 2012-2022

When the water temperature light comes on in a Dacia Logan vehicle, it is important to go to the workshop to have a computerized diagnosis regarding the light, because what may seem to the human eye as an indication of replacing the water pump may actually concern the fuel pressure sensor. The first thing to do is to replace the diesel filter and only then the sensor. To replace the sensor, we need to: open the front hood and remove the engine protection cover. Then we proceed to remove the sensor, disconnect the connector and remove the sensor with a 27mm wrench. Insert the new sensor and connect it to the connector.

Posted on 17 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the AdBlue Warning Light on the Dacia Logan?
How to Remove the AdBlue Warning Light on the Dacia Logan?
Dacia Logan (2012-2022 / MK 2) If the AdBlue warning light has illuminated on your Dacia Logan, it means the anti-pollution fluid has reached a too low level and needs to be topped…
Removing Front and Rear Logos and Bumper
Removing Front and Rear Logos and Bumper
Dacia Logan Video on assembling and disassembling body parts of the Dacia Logan. …
How to Reset the TPMS Light on the Dacia Logan
How to Reset the TPMS Light on the Dacia Logan
Dacia Logan (2004-2012 / MK 1) If you notice a warning message about low tyre pressure when starting your Dacia Logan, don’t worry as it is often just a sensor reading error. A man…

Other guides you may be interested in

How to Remove the Headrests from the Fiat Panda

In this guide, discover the main steps to disassemble and remove the headrests, both front and rear, from the Fiat Panda, as well as other models from the manufacturer. First, get in the vehicle and press the buttons located at the base of the headrest posts; while holding them down, pull the headrests upwards to remove them, as shown in the video. At this point, reinstall the headrest by lowering it until it clicks and adjust it to the desired height!

Watch the video!


by ScegliAuto

More videos