Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Brake Pads on a Daihatsu Terios

Model: Daihatsu Terios J200, MK 2, F700 - Years 2006-2017
Part: Brake pads

Today's guide will show you the main steps to remove and replace the front brake pads on a Daihatsu Terios. First, lift the vehicle and remove the front wheel; then unscrew the bolts securing the front brake caliper to remove it from the disc, as shown in the video. At this point, remove the old brake pads and replace them with new ones of the correct type, cleaning the caliper of any residual dirt; finally, reinstall the front brake caliper onto the disc!

Updated on 20 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing Brake Pads from Daihatsu Terios
Removing Brake Pads from Daihatsu Terios
Daihatsu Terios (1997-2005 / J100, MK 1, F500) Removing the front brake pads from a Daihatsu Terios? Remove the wheel and proceed with the replacement. Lift the vehicle with a jack, then remove th…
How to Set the Time on a Daihatsu Terios
How to Set the Time on a Daihatsu Terios
Daihatsu Terios (1997-2005 / J100, MK 1, F500) Before you begin, sit in the driver's seat of your Daihatsu Terios. Start by activating the instrument cluster by turning the key in the ignition bar…
Where are the fuses located on the Daihatsu Terios?
Where are the fuses located on the Daihatsu Terios?
Daihatsu Terios (1997-2005 / J100, MK 1, F500) The fuses of the Daihatsu Terios are located inside the designated fuse boxes: this model has two. The first is situated at the bottom right of the s…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos