Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads on a Daihatsu Sirion?

Model: Daihatsu Sirion MK 2 - Years 2005-2015
Part: Brake pads

To replace the front brake pads on a Daihatsu Sirion, lift the car so that the corresponding wheel is off the ground. Remove the bolts securing the wheel to the hub to completely take it off and access the brake caliper at the back. Detach the caliper from the disc by unscrewing the fixing bolts, allowing you to extract the pads inside. After removing the old pads, insert the new ones and refit the caliper and wheel.

Updated on 31 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Clutch on the Daihatsu Sirion 1.3L DVVT
How to Replace the Clutch on the Daihatsu Sirion 1.3L DVVT
Daihatsu Sirion (1998-2004 / MK 1) This guide provides instructions for removing and replacing the clutch kit on the Daihatsu Sirion 1.3L DVVT. First, raise the vehicle and begin remov…
How to Remove the Door Panel on a Daihatsu Sirion
How to Remove the Door Panel on a Daihatsu Sirion
Daihatsu Sirion (1998-2004 / MK 1) Here’s how to remove the external mirror on a Daihatsu Sirion. Use a lever to detach the internal trim of the mirror (there are plastic clips) and un…
How to Replace the Cylinder Head Cover Gasket of the Daihatsu Sirion
Daihatsu Sirion (2005-2015 / MK 2) In this video tutorial, learn how to disassemble and replace the cylinder head cover gasket of the Daihatsu Sirion, following the instructions below.…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos