Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads on Daihatsu Tanto - Subaru Lucra

Model: Daihatsu Daihatsu Various
Part: Brake pads

Today, we will guide you through the process of removing and replacing the front brake pads on the Daihatsu Tanto, as well as the Subaru Lucra. First, raise the vehicle and start by removing the front wheel; then unscrew the bolts securing the brake caliper, which you will find at the back, as shown in the video. At this point, remove the caliper from the disc, thus taking out the old brake pads. Apply pressure to the caliper piston to retract it, cleaning the caliper of dirt, and follow the video tutorial to the end!

Updated on 17 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the Daihatsu Mira key.
How to replace the battery of the Daihatsu Mira key.
Daihatsu Daihatsu Various If the battery inside the key of your Daihatsu Mira is completely exhausted and you are wondering how to replace it correctly, then all you have to d…
Removing the Lock on a Daihatsu Charade
Removing the Lock on a Daihatsu Charade
Daihatsu Daihatsu Various After removing the entire door panel (for this task, refer to other tutorials; simply remove all the screw covers and the screws underneath them, the…
How to Change the Engine Oil and Filter on the Daihatsu Charade DIY
How to Change the Engine Oil and Filter on the Daihatsu Charade DIY
Daihatsu Daihatsu Various To change the engine oil on the Daihatsu Charade, work with the engine warm but not hot, so the oil drains better. Lift the front end on stable axle …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos