Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Lock on a Daihatsu Charade

Model: Daihatsu Daihatsu Various
Part: Door lock

After removing the entire door panel (for this task, refer to other tutorials; simply remove all the screw covers and the screws underneath them, then disconnect the connectors), you will access the fixing screw located where the opening handle was. Unscrew this and then proceed to unscrew the other screw that secures the lock of the handle, which is located on the side of the door (see video). This will allow you to extract the lock from the door, and you can easily insert the new one by screwing in the same screws to secure it in place.

Updated on 4 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Daihatsu Daihatsu Various To change the engine oil on the Daihatsu Charade, work with the engine warm but not hot, so the oil drains better. Lift the front end on stable axle …
Daihatsu Daihatsu Various Today, we will guide you through the process of removing and replacing the front brake pads on the Daihatsu Tanto, as well as the Subaru Lucra. First…
Daihatsu Daihatsu Various If the battery inside the key of your Daihatsu Mira is completely exhausted and you are wondering how to replace it correctly, then all you have to d…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos