Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Spark Plugs on the Datsun Go 1.2

Model: Datsun Go MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Spark plugs

Video tutorial

In this brief guide, we will see the main instructions to remove and replace the spark plugs of the Datsun Go 1.2 gasoline engine. First, open the hood of your car and start by removing the intake hose; then unscrew the screws of the air filter box to remove it, disconnecting the air sensor tube.

At this point, disconnect the connectors of the spark plugs by unscrewing the screws at the base; use a socket wrench with an extension to unscrew and remove the spark plugs, hand-tightening the new ones before tightening with a wrench!


Updated on 14 May 2026 by ScegliAuto


Related tutorials

Datsun Go (2013-2022 / MK 1) In this guide, you will find the main instructions on how to remove and replace the spark plugs on the Datsun Go. First, open the hood of your car an…
Datsun Go (2013-2022 / MK 1) If you have any issues with one or more electrical components of your Datsun Go and want to check the respective fuses but don't know where they are,…
Datsun Go (2013-2022 / MK 1) To replace the fuel filter on a Datsun Go, access the underside of the vehicle near the fuel tank. Here, you will locate the fuel filter, which needs…

Other guides you may be interested in

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos