Do it yourself
Frequently asked questions about cars and motorcycles

How do you replace the fork of the Derbi Senda 50?

Model: Derbi Senda 50cc
Part:

Video tutorial

It will be possible to replace the fork of the Derbi Senda 50 by loosening the screws that hold it in the corresponding housing: before performing this procedure, it will be necessary to loosen the screws that fix the front wheel to the base of the fork.

Once they have been detached, it will be possible to proceed by also detaching the brake caliper from the corresponding disc: in this way, the screws that fix the fork from the top can be unscrewed so that it can be removed.

Then, the new piece must be inserted and the front wheel must be mounted back in its place.


Posted on 11 July 2025 by ScegliAuto


Related tutorials

Senda 50cc In order to replace the fork of the Derbi Senda 50, you will need to loosen the screws that secure it to its housing: before doing this, it will be n…
Senda 50cc This operation must be performed with the engine cold. Before starting, position your Derbi Senda 50 on the side stand. Begin by disconnecting the ca…
Senda 50cc Before you begin, sit on the seat of your Derbi Senda. Start by inserting the key into the ignition switch and turning it fully clockwise. Next, pull…

How to Set the Clock on the Kymco Agility?

To adjust the clock on the Kymco Agility, insert the key into the ignition to turn on the dashboard: once it is on, press and hold the button at the bottom left of the dashboard. You will notice that the hours will start to flash, which can be changed by repeatedly pressing the button to the right of the dashboard: once the hours are set, press the button on the left of the dashboard to adjust the minutes in the same way.

Watch the video!


by ScegliAuto

More videos