Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the clutch on a Derbi Variant 50?

Model: Derbi Variant 50
Part: Clutch

This video is currently unavailable

To replace the clutch of the Derbi Variant 50, you need to loosen the screws that secure the transmission cover located on the right side of the motorcycle: once this is completely removed, you can identify the underlying screws that secure the clutch discs to their housing.

This way, you will be able to completely extract them so that you can insert the new ones: these must be secured with the appropriate screws that were removed earlier, and then everything should be covered with the specific cover.


Posted on 16 January 2026 by ScegliAuto


Related tutorials

How do you replace the clutch springs of the Derbi Variant?
How do you replace the clutch springs of the Derbi Variant?
Variant 50 In order to replace the clutch springs of the Derbi Variant, you have to completely remove this component from its housing: the clutch is located in …
How do you replace the clutch of the Derbi Variant 50?
How do you replace the clutch of the Derbi Variant 50?
Variant 50 To replace the clutch of the Derbi Variant 50, you will need to loosen the screws that hold the transmission casing, located on the right side of the…
How to Replace the Chain on a Derbi Variant 50?
How to Replace the Chain on a Derbi Variant 50?
Variant 50 You can replace the chain on a Derbi Variant 50 by breaking the old chain at a point using the appropriate chain cutter. Once the old chain is opened…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Reset the Engine Light on a Yamaha Ray RZ?

To reset the engine light on a Yamaha Ray RZ, connect a diagnostic tool to the vehicle's OBD port. The OBD port is located just above the battery housing, accessible by removing the panel in the centre of the footwell. Once this panel is removed, connect the scanner and select the car model and its corresponding version. After connecting the scanner and following the tutorial steps, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos