Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the exhaust on the Derbi Variant 50?

Model: Derbi Variant 50
Part: Exhaust muffler

Video tutorial

You can replace the exhaust on the Derbi Variant 50 by loosening the screws that secure it to its housing, located near the rear wheel on the right side: once the screws are loosened, you can remove the exhaust tip from its seat by also widening the connecting clamp positioned between the exhaust and the manifold.

At this point, you can position the new exhaust tip in its place, securing it with the appropriate screws and connecting it to the manifold with the clamp: this way, you can ensure that everything works.


Posted on 29 April 2026 by ScegliAuto


Related tutorials

How to Replace the Chain on a Derbi Variant 50?
How to Replace the Chain on a Derbi Variant 50?
Variant 50 You can replace the chain on a Derbi Variant 50 by breaking the old chain at a point using the appropriate chain cutter. Once the old chain is opened…
How do you replace the clutch springs of the Derbi Variant?
How do you replace the clutch springs of the Derbi Variant?
Variant 50 In order to replace the clutch springs of the Derbi Variant, you have to completely remove this component from its housing: the clutch is located in …
How do you disassemble the engine of the Derbi Variant?
How do you disassemble the engine of the Derbi Variant?
Variant 50 To perform the operation of the Derbi Variant engine, you can loosen the screws that fix the block to its housing in the central lower part of the fr…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Reset the Engine Light on a Yamaha Ray RZ?

To reset the engine light on a Yamaha Ray RZ, connect a diagnostic tool to the vehicle's OBD port. The OBD port is located just above the battery housing, accessible by removing the panel in the centre of the footwell. Once this panel is removed, connect the scanner and select the car model and its corresponding version. After connecting the scanner and following the tutorial steps, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos