Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Derbi
    3. : Mulhacen 125

How to Replace the Exhaust of the Derbi Mulhacen 125?

Model: Derbi Mulhacen 125
Part: Exhaust muffler

Video tutorial

You can replace the exhaust of the Derbi Mulhacen 125 by loosening the screws that secure the exhaust tip to its housing: once the securing screws are loosened to free it from the corresponding supports, you can widen the connecting clamp located between the exhaust and the exhaust manifold.

Once the exhaust is removed, position the new one: connect it to the manifold and then secure it to the supports, ensuring everything functions correctly.


Posted on 12 June 2026 by ScegliAuto


Related tutorials

How to replace the exhaust on a Derbi Senda 125?
How to replace the exhaust on a Derbi Senda 125?
Senda 125 To replace the exhaust on a Derbi Senda 125, loosen the bolts securing the exhaust at the lower central part of the bike and at the rear side. Once a…
How to Replace the Exhaust on a Derbi GPR 125?
How to Replace the Exhaust on a Derbi GPR 125?
Gpr 125 To replace the exhaust on a Derbi GPR 125, loosen the screws securing the exhaust terminal located near the rear wheel on the right side of the bike.…
How to Change the Engine Oil of the Derbi Mulhacen 659
How to Change the Engine Oil of the Derbi Mulhacen 659
Mulhacen 659 Here are the steps to perform the routine maintenance service by changing the engine oil and oil filter on the Derbi Mulhacen 659 motorcycle. First, …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Reset the Engine Light on a Yamaha Ray RZ?

To reset the engine light on a Yamaha Ray RZ, connect a diagnostic tool to the vehicle's OBD port. The OBD port is located just above the battery housing, accessible by removing the panel in the centre of the footwell. Once this panel is removed, connect the scanner and select the car model and its corresponding version. After connecting the scanner and following the tutorial steps, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos