Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Derbi
    3. : Mulhacen 659

How to Change the Engine Oil of the Derbi Mulhacen 659

Model: Derbi Mulhacen 659
Part: Engine oil

Video tutorial

Here are the steps to perform the routine maintenance service by changing the engine oil and oil filter on the Derbi Mulhacen 659 motorcycle. First, place the bike on its centre stand and start unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge, replacing it with a new one, tightening it by hand before securing it with a spanner.

Finally, unscrew the oil filler cap and top up the oil!


Updated on 27 May 2026 by ScegliAuto


Related tutorials

How to Replace the Exhaust of the Derbi Mulhacen 125?
How to Replace the Exhaust of the Derbi Mulhacen 125?
Mulhacen 125 You can replace the exhaust of the Derbi Mulhacen 125 by loosening the screws that secure the exhaust tip to its housing: once the securing screws ar…
How to Change the Engine Oil on a Derbi Fds
How to Change the Engine Oil on a Derbi Fds
Fds Below are the instructions on how to carry out the routine maintenance service by replacing the engine oil and oil filter on a Derbi Fds. First, plac…
How to Change the Engine Oil on a Derbi D50-B
How to Change the Engine Oil on a Derbi D50-B
D50b Let's discover the steps to change the engine oil as part of the regular maintenance service on a Derbi D50 enduro bike. First, warm up the engine fo…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Reset the Engine Light on a Yamaha Ray RZ?

To reset the engine light on a Yamaha Ray RZ, connect a diagnostic tool to the vehicle's OBD port. The OBD port is located just above the battery housing, accessible by removing the panel in the centre of the footwell. Once this panel is removed, connect the scanner and select the car model and its corresponding version. After connecting the scanner and following the tutorial steps, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos