Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Start a Derbi D50B

Model: Derbi D50b
Part: Checks and maintenance

Video tutorial

Before you begin, position your Derbi D50B on its stand. Start by inserting the key into the ignition barrel and turn it fully clockwise.

Next, open the fuel tap. Once done, pull out the starter lever located on the right side of the engine block. At this point, repeatedly push the starter lever until the engine starts.

When the engine of your Derbi D50B has started, you can close the ignition lever, and the procedure will be correctly completed.


Updated on 22 April 2026 by ScegliAuto


Related tutorials

How to Replace the Clutch on a Derbi D50B?
How to Replace the Clutch on a Derbi D50B?
D50b To replace the clutch on a Derbi D50B, first remove the bolts securing the cover located on the right side of the bike, near the kickstarter. By unsc…
How to Remove the Cylinder from the Derbi D50B Engine Block?
How to Remove the Cylinder from the Derbi D50B Engine Block?
D50b To remove the cylinder from the Derbi D50B engine block, first remove the spark plug and unscrew the bolts of the detachable head. Disconnect the tem…
How to Change the Engine Oil on a Derbi D50-B
How to Change the Engine Oil on a Derbi D50-B
D50b Let's discover the steps to change the engine oil as part of the regular maintenance service on a Derbi D50 enduro bike. First, warm up the engine fo…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Reset the Engine Light on a Yamaha Ray RZ?

To reset the engine light on a Yamaha Ray RZ, connect a diagnostic tool to the vehicle's OBD port. The OBD port is located just above the battery housing, accessible by removing the panel in the centre of the footwell. Once this panel is removed, connect the scanner and select the car model and its corresponding version. After connecting the scanner and following the tutorial steps, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos