Do it yourself
Frequently asked questions about cars and motorcycles
Let's see the main steps to reset the service light for routine maintenance of the oil change on a Derbi DRD 125, as well as on the Senda. First, turn on the ignition of your motorcycle by turning the key to position one; then press the button found on the right side of the panel, holding it until the countdown for entering the code starts, as shown in the video. Then, scroll through the three menu items, subsequently turning off the instrument panel; upon turning it back on, you will see that the oil light has been reset!

Updated on 29 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Drd 125 In order to disassemble the engine of the Derbi DRD 125, you need to loosen the screws that fix the engine block to the corresponding housing in the …
Drd 125 To replace the engine of the Derbi DRD 125, you need to completely remove the block from its housing by unscrewing the screws that secure it to its m…
Drd 125 In this tutorial, you will find instructions to disassemble and replace the clutch discs of a Derbi DRD 125. First, drain the engine oil by unscrewin…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos