Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle the Engine of a Derbi Senda 125?

Model: Derbi Senda 125
Part: Engine

Video tutorial

To dismantle the engine of the Derbi Senda, loosen the bolts that secure the block to the appropriate supports in the lower central part of the vehicle: once the bolts are loosened and the connectors disconnected, the block can be removed from its housing.

Start by loosening the bolts that secure the cylinder, detaching it from the top: consequently, you can detach the piston from the corresponding conrod by loosening the bolts that secure the side crankcase halves.

At this point, the necessary internal parts can be replaced, remounting all the components removed earlier.


Updated on 9 July 2026 by ScegliAuto


Related tutorials

How do you disassemble the engine of the Derbi Senda 125?
How do you disassemble the engine of the Derbi Senda 125?
Senda 125 To disassemble the engine of the Derbi Senda 125, you need to loosen the screws that hold it to its housing in the center of the frame: once the fixi…
How do you disassemble the engine of the Derbi Senda 125?
How do you disassemble the engine of the Derbi Senda 125?
Senda 125 To disassemble the engine of the Derbi Senda 125, you need to loosen the screws that secure the engine block to its housing, then disconnect the conn…
How to Remove the Engine from a Derbi Senda 125?
How to Remove the Engine from a Derbi Senda 125?
Senda 125 It is possible to remove the engine from the Derbi Senda 125 by taking it out of its housing, loosening the fixing screws that secure it to the respe…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Reset the Engine Light on a Yamaha Ray RZ?

To reset the engine light on a Yamaha Ray RZ, connect a diagnostic tool to the vehicle's OBD port. The OBD port is located just above the battery housing, accessible by removing the panel in the centre of the footwell. Once this panel is removed, connect the scanner and select the car model and its corresponding version. After connecting the scanner and following the tutorial steps, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos