Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Derbi Senda 50cc
Part: Engine

To remove the engine from the Derbi Senda 50, completely slide the block out of its seat by removing the side panels and extracting it from its housing after disconnecting the connectors. Once the engine is extracted, you will need to unscrew the bolts that secure the two half casings to remove them and access the components inside. It will be necessary to remove the ring that secures the piston to its conrod, and you can also loosen the bolts that secure the clutch; this will allow you to replace the necessary parts and reassemble the engine.

Updated on 12 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you disassemble the engine of the Derbi Senda 50?
How do you disassemble the engine of the Derbi Senda 50?
Senda 50cc To disassemble the engine of the Derbi Senda 50, you need to loosen the screws that secure the cylinder to the top of the engine block: once the fixi…
How to Replace the Spark Plug on a Derbi Senda 50
How to Replace the Spark Plug on a Derbi Senda 50
Senda 50cc This operation must be performed with the engine cold. Before starting, position your Derbi Senda 50 on the side stand. Begin by disconnecting the ca…
How to Start a Derbi Senda
How to Start a Derbi Senda
Senda 50cc Before you begin, sit on the seat of your Derbi Senda. Start by inserting the key into the ignition switch and turning it fully clockwise. Next, pull…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos