Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery in the Dodge Avenger key.

Model: Dodge Avenger MK 1 - Years 2008-2013
Part: Key

It is not always necessary to buy a new key for your Dodge Avenger when the one you have suddenly stops working. In fact, many times the problem is caused by the exhausted battery inside it and below we will discover together how to replace it quickly and safely. First, remove the key cover with the help of a small flathead screwdriver, then locate the exhausted battery and remove it. At this point, all you have to do is insert the new battery (CR 2032 model) and reassemble the previously removed cover.

Posted on 28 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the oil on a 2009 Dodge Avenger
How to reset the oil on a 2009 Dodge Avenger
Dodge Avenger (2008-2013 / MK 1) After replacing the motor oil in the 2011 Dodge Avenger's tank, it is necessary to proceed with resetting the oil light. To reset the light, we must …
How to Reset the Oil Light on a 2009 Dodge Avenger
How to Reset the Oil Light on a 2009 Dodge Avenger
Dodge Avenger (2008-2013 / MK 1) In this guide, you will find the steps to follow if you intend to reset the oil light on your 2009 Dodge Avenger yourself. First, enter the car and i…
How to reset the oil on a 2012 Dodge Avenger
How to reset the oil on a 2012 Dodge Avenger
Dodge Avenger (2008-2013 / MK 1) The following video tutorial will explain how to reset the oil light on a Dodge vehicle. To reset the oil light on a 2012 Dodge Avenger, we need to p…

Other guides you may be interested in

How to Remove the Gear Knob on an Opel Astra

How to replace the gear knob on an Opel Astra? Follow these steps: use a plastic lever to disconnect the leather gaiter frame (if you need to replace it). Grip the knob with both hands and pull it upwards (with a strong and decisive motion) until it comes off the gear stick. For installation: fit the new gaiter and position it on the centre tunnel, take the new knob and push it onto the stick, tightening it until fully threaded. Test the movement of the stick on the centre tunnel to ensure the knob is correctly fitted.

Watch the video!


by ScegliAuto

More videos