Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the fuse box of the Dodge Avenger located?

Model: Dodge Avenger MK 1 - Years 2008-2013
Part: Fuse box

The Dodge Avenger produced from 2008 to 2013 has a fuse box inside. The fuse box is located inside the front hood; specifically, the box is installed between the battery and the engine of the car. Inside this box, there are some fuses such as the airbag fuse, the second cigarette lighter fuse, the battery fuse, the headlight fuse, the ECU fuse, the radio fuse, and so on. On the cover of the box, there is a label that indicates the amperage and location of each fuse to facilitate their replacement if needed. To access the box, simply open the front hood, lift the lever next to the accelerator pedal, and then remove the cover of the box by releasing its sides.

Posted on 8 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the oil on a 2009 Dodge Avenger
How to reset the oil on a 2009 Dodge Avenger
Dodge Avenger (2008-2013 / MK 1) After replacing the motor oil in the 2011 Dodge Avenger's tank, it is necessary to proceed with resetting the oil light. To reset the light, we must …
How to replace the battery in the Dodge Avenger key.
How to replace the battery in the Dodge Avenger key.
Dodge Avenger (2008-2013 / MK 1) It is not always necessary to buy a new key for your Dodge Avenger when the one you have suddenly stops working. In fact, many times the problem is c…
How to Reset the Oil Light on a 2009 Dodge Avenger
How to Reset the Oil Light on a 2009 Dodge Avenger
Dodge Avenger (2008-2013 / MK 1) In this guide, you will find the steps to follow if you intend to reset the oil light on your 2009 Dodge Avenger yourself. First, enter the car and i…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos