|
Do it yourself
| |||
| ||||
Resetting the Tyre Pressure Warning Light on Dodge Journey
Model: Dodge Journey
MK 1
- Years:
2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Video tutorial
How to reset the tyre pressure warning light on Dodge Journey? Here’s how to do it. Turn on the vehicle’s ignition, use the buttons on the lever to the left of the steering wheel, then, once in the settings menu, scroll with the up/down button until you find the "Reset Tyres" option, select it with OK to turn off the tyre pressure warning light and exit the settings menu. Check the instrument panel by turning it off and on again with the ignition key. Inflate the tyres to the pressure indicated in the maintenance manual.
Updated on 29 March 2026 by ScegliAuto
Related tutorials
Dodge Journey
(2008-2020 /
MK 1)
The TPMS reset of the 2015 Dodge Journey must be performed when the tire pressure warning light on the vehicle's display turns on. This light is desi…
Dodge Journey
(2008-2020 /
MK 1)
The following steps will show you how to reset the tyre pressure monitoring system (TPMS) warning light of the Dodge Journey, as well as the Fiat Fre…
Dodge Journey
(2008-2020 /
MK 1)
Below is the guide that will allow you to reset the tyre pressure light on the Dodge Journey; before performing the reset, ensure that the pressure o…
Other guides you may be interested in
|
How to Reset the AdBlue Warning Light on a Peugeot Boxer
To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.083
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
