Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Brake Discs

Model: Dodge Avenger MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013
Part: Brake rotors

Video tutorial

The braking system of your car is essential for the safety of the driver. This guide shows how to replace these discs.

Brake discs are part of the disc braking system that rotates with the wheel and are very important for braking power. First, turn the steering wheel towards your side so that the brake caliper faces you. Lift the car with a jack and remove the wheel after unscrewing the wheel bolts.

Once lifted, finish unscrewing the wheel bolts, remove the wheel, and you will be able to slide the brake caliper off with a bit of play.


Updated on 12 February 2026 by ScegliAuto


Related tutorials

Where is the fuse box of the Dodge Avenger located?
Where is the fuse box of the Dodge Avenger located?
Dodge Avenger (2008-2013 / MK 1) The Dodge Avenger produced from 2008 to 2013 has a fuse box inside. The fuse box is located inside the front hood; specifically, the box is installed…
Instructions for Alternator Pulley Replacement
Instructions for Alternator Pulley Replacement
Dodge Avenger (2008-2013 / MK 1) A common fault is the noise from the alternator pulley, which manifests as a distinct squeaking sound: keep in mind that removing the pulley requires…
How to Reset the Oil Light on a 2009 Dodge Avenger
How to Reset the Oil Light on a 2009 Dodge Avenger
Dodge Avenger (2008-2013 / MK 1) In this guide, you will find the steps to follow if you intend to reset the oil light on your 2009 Dodge Avenger yourself. First, enter the car and i…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos