Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the air conditioning refill valve located in the Dodge Journey?

Model: Dodge Journey MK 1 - Years 2008-2020
Part: Air conditioner

In this video we can see where the refill valve of the air conditioning of the Dodge Journeuy is located and how to insert the new refrigerant gas, very simple operation. As shown, the low pressure valve is located in the innermost area of the engine compartment, just below the skid plate on the passenger side. To proceed with the refill, first unscrew the cap, then screw the cylinder tube and, with both the engine and the air conditioning on, insert the required amount of gas. The latter is indicated on the plate located in the internal area of the bonnet.

Posted on 9 August 2022 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box of the Dodge Journey located?
Where is the fuse box of the Dodge Journey located?
Dodge Journey (2008-2020 / MK 1) If you are looking for the box containing all the fuses for your Dodge Journey, you just need to follow all the steps described in the following guid…
Where is the fuse box of the Dodge Journey located?
Where is the fuse box of the Dodge Journey located?
Dodge Journey (2008-2020 / MK 1) Thanks to the procedure described in our new guide dedicated to all of you who own a Dodge Journey, you will be able to find the box containing all t…
Where is the Bluetooth module control unit located in the Dodge Journey?
Where is the Bluetooth module control unit located in the Dodge Journey?
Dodge Journey (2008-2020 / MK 1) In this video, we can see where the Bluetooth module control unit is located in the Dodge Journey and how to proceed in case we need to replace it, w…

Other guides you may be interested in

How to Remove an EGR Valve from a Land Rover Freelander

This video shows how to remove an EGR valve from a Land Rover Freelander. Lift the bonnet and secure it, then use a screwdriver to unscrew the locking pins of the ventilation pipe, removing the piece from the engine bay. Start unscrewing the fixing pins of the EGR valve as shown in the video. Once the piece is removed from its seat, unscrew the screws present on it with a screwdriver. Disconnect the power connectors from the valve, and remove it from the engine bay. Once the piece is removed, install the new EGR valve in the engine bay with the associated parts. Finally, reassemble the ventilation pipe in the engine bay after cleaning it of any dirt and deposits.

Watch the video!


by ScegliAuto

More videos