Do it yourself
| ||||
|
Dodge Caliber - Video tutorial
Model: Dodge Caliber
MK 1
- Years 2006-2012 To replace the gasket in question on this model you need to start removing the connectors connected to the spark plugs and remove them by releasing them from the bolts. Subsequently you can remove both pipes connected to the cylinder head, oil and vacuum, now you have to remove all the bolts that anchor the cylinder head to the engine, in total there are 18, 14 around the cylinder head and 4 are located between the spark plug positions and the rail, in order to definitively lift the cylinder head it will be necessary to unscrew some bolts with a screwdriver and use a bit of leverage to detach it from the rest of the engine. Once raised and overturned, the gaskets present can be replaced and the cylinder head reassembled on the engine.
Posted on 18 September 2023 by ScegliAuto
Other guides that may interest you
|
How to open the bonnet of the Volkswagen PoloLet's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.018
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |