Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Checking the Radiator Cap for Coolant

Model: Dodge Caliber MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Antifreeze coolant

Video tutorial

If you need to carry out any checks on the engine cooling system, ensure the engine is cold. When the engine is hot, the coolant is under pressure, and attempting to open the expansion tank or radiator cap could result in burns.

Once the engine has cooled, inspect the system, ensuring there is no rust or sludge under the radiator and expansion tank caps. This rules out oil passing through the head gasket or air infiltrating the system.


Updated on 17 February 2026 by ScegliAuto


Related tutorials

Head Gasket Problem
Head Gasket Problem
Dodge Caliber (2006-2012 / MK 1) If the engine runs unevenly as if, in colloquial terms, it is missing a few beats, then a problem with the spark plugs or ignition coils can be suspe…
Replacement of Ignition Coil for Third Cylinder
Replacement of Ignition Coil for Third Cylinder
Dodge Caliber (2006-2012 / MK 1) If the engine runs unevenly after starting and the engine warning light is illuminated, there is likely an ignition issue in one of the cylinders, me…
Instructions for Replacing the Driveshaft
Instructions for Replacing the Driveshaft
Dodge Caliber (2006-2012 / MK 1) Once the vehicle is raised on a lift, remove the wheel, take off the safety clip protecting the driveshaft nut, and unscrew the nut itself. Then, uns…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos