Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the Car Suspension Arm

Model: Dodge Caliber MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Control arm

Video tutorial

The suspension arms of the car ensure the connection between the chassis and the struts. If they wear out, they need to be replaced because a faulty arm can lead to loss of vehicle control.

This is not a complicated job, and if possible, you can do it yourself, saving some money. First, remove the wheel from the hub, keeping the bolts aside to avoid losing any parts.

Next, detach the stabiliser link from the arm gently using two 14mm spanners. Once done, you can remove the link.

After removing the joint, the suspension arm will be in front of you, ready to be replaced.


Updated on 16 February 2026 by ScegliAuto


Related tutorials

Removal and Replacement of Control Arm
Removal and Replacement of Control Arm
Dodge Caliber (2006-2012 / MK 1) This video shows how to remove and replace the control arm on your car. When driving on bumpy roads or uneven surfaces and you hear a strange noise f…
Demonstration of Half Shaft Dismantling
Demonstration of Half Shaft Dismantling
Dodge Caliber (2006-2012 / MK 1) To dismantle the half shaft, first lift the car with a jack and position axle stands in accordance with safety regulations. Remove the wheel. Take ou…
Replacing the Cabin Air Filter
Replacing the Cabin Air Filter
Dodge Caliber (2006-2012 / MK 1) This tutorial explains how to replace the cabin air filter in a Dodge Caliber. The filter box is located in the glove compartment on the passenger si…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos