Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the ignition cylinder in the Dodge Journey?

Model: Dodge Journey MK 1 - Years 2008-2020
Part: Checks and maintenance

In this tutorial, we can see how to disassemble the ignition cylinder in the Dodge Journey, a very simple operation. First of all, using a plastic spatula, we remove the right ventilation nozzle together with the trim, then we also remove the opposite trim and unscrew the two screws that have just been released. Next, we disassemble both the air conditioner console and the entire radio block and remove the frame of the ignition cylinder. To extract the latter, it is sufficient to unlock the two internal clips by accessing them from the radio housing.

Posted on 28 July 2023 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the transmission of the Dodge Journey 2.4L.
How to disassemble the transmission of the Dodge Journey 2.4L.
Dodge Journey (2008-2020 / MK 1) Below we will see the steps that will allow us to disassemble and replace the transmission of the Dodge Journey 2.4L, following the instructions belo…
How to reset the oil light on the Dodge Journey
How to reset the oil light on the Dodge Journey
Dodge Journey (2008-2020 / MK 1) To manually reset the oil light of your 2016 Dodge Journey, simply follow this simple manual procedure. First, enter the interior of the vehicle and …
How to remove the injectors from the Dodge Journey V6.
How to remove the injectors from the Dodge Journey V6.
Dodge Journey (2008-2020 / MK 1) Today's guide will show us how to disassemble and replace the fuel injectors of the Dodge Journey V6, as well as the Fiat Freemont. First, we open th…

Other guides you may be interested in

How to Remove and Install the External Wing Mirror on a Volkswagen Tiguan

Here’s how to remove and install the external wing mirror on a Volkswagen Tiguan (passenger side). After removing the door panel: disconnect the battery terminals, unscrew the fastening pins of the mirror using the appropriate socket. Once the fastening pins are removed: take out the mirror with the electric adjustment wires from the car door. To reassemble: refit the mirror with the pins, the electric adjustment wires, and the plastic panel of the door. Finally, test the correct operation of the mirror.

Watch the video!


by ScegliAuto

More videos