Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Have you ridden enough miles and are now ready to change the oil on your Monster? Good, you're in the right place. With the engine cold, place a container under the oil sump and unscrew the plug with a spanner, being careful of the oil that spills out as soon as the bolt is free. Also remove the filter. Detach the exhaust springs and loosen the clamp. Remove the central part of the exhaust to allow access to examine and possibly clean the filter hidden behind it. Be careful when refitting it to avoid twisting. Position the bike upright to drain as much used oil as possible. Screw in the plug and the new filter. Refit the exhaust and the springs. You can top up with new oil.

Updated on 7 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the engine oil of the Ducati Monster 821?
How do you replace the engine oil of the Ducati Monster 821?
Monster 821 To replace the engine oil of the Ducati Monster 821, you need to loosen the drain plug of the oil pan, which is located at the central lower part of …
How to change the engine oil and oil filter on the Ducati Monster 821
How to change the engine oil and oil filter on the Ducati Monster 821
Monster 821 Today, we will go through the instructions on how to perform the routine maintenance service by changing the engine oil and oil filter on the Ducati …
Guide to Replacing the Battery of the Ducati Monster 821
Guide to Replacing the Battery of the Ducati Monster 821
Monster 821 Today, we will go through the instructions that will allow you to remove and replace the battery of the Ducati Monster 821 motorcycle by following th…

How do you replace the exhaust pipe of the Keeway RKF 125?

The operation of replacing the exhaust on the Keeway RKF is carried out by loosening the screws that fix the exhaust terminal at the lower support near the crank and at the mudguard of the motorcycle. After these two screws have been loosened, it will be possible to unscrew the two screws that fix the initial part of the exhaust to the remaining part of the exhaust pipe, at the front of the motorcycle. In this way, the old exhaust can be completely removed from its seat, replacing it with a new spare part and verifying that everything works.

Watch the video!


by ScegliAuto

More videos