Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the engine oil and oil filter on the Ducati Monster 821

Model: Ducati Monster 821
Part: Engine oil

Video tutorial

Today, we will go through the instructions on how to perform the routine maintenance service by changing the engine oil and oil filter on the Ducati Monster 821. First, place the bike on a stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge with the appropriate tool and replace it with a new one, screwing it in by hand before tightening gently.

Finally, unscrew the filler cap and pour in the correct amount of oil, as indicated on the small sight glass.


Updated on 22 September 2026 by ScegliAuto


Related tutorials

How to change the engine oil in the Ducati Monster 821?
How to change the engine oil in the Ducati Monster 821?
Monster 821 You can change the engine oil in the Ducati Monster 821 by loosening the drain plug located at the central lower part of the vehicle: once the plug h…
How do you replace the engine oil of the Ducati Monster 821?
How do you replace the engine oil of the Ducati Monster 821?
Monster 821 To replace the engine oil of the Ducati Monster 821, you need to loosen the drain plug of the oil pan, which is located at the central lower part of …
How to Change the Oil on a Ducati Monster 821
How to Change the Oil on a Ducati Monster 821
Monster 821 Have you ridden enough miles and are now ready to change the oil on your Monster? Good, you're in the right place. With the engine cold, place a cont…

How to Replace the Air Filter in a Yamaha TW 200

In this tutorial, see how to replace the air filter in a Yamaha TW 200, a very simple and quick operation. First, wait for the engine to cool down sufficiently to operate safely, then remove the left side panel. Next, unscrew the four screws around the perimeter of the airbox, remove the cover, and separate the old filter from it. Clean any dirt residue inside the housing, place the new part, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos