Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
It will be possible to replace the levers of the Ducati Streetfighter V4 S by loosening the nuts that secure the levers to their housing: these nuts will be located at the base of the levers themselves, and once removed, they will allow the pins that lock them to be pulled out. Then, you will need to proceed by unscrewing the collar that connects the lever in question to the corresponding control cable: at this point, it will be possible to completely detach the old levers and connect the new ones. These can now be secured with screws to their housings on the sides of the handlebars, ensuring they function correctly.

Posted on 9 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the levers on the Ducati Streetfighter V4 S?
How to replace the levers on the Ducati Streetfighter V4 S?
Streetfighter V4 S To replace the levers on the Ducati Streetfighter V4 S, you need to loosen the bolt that secures the pin at the end of the lever: this bolt is locate…
How to Replace the Front Brake Pads on a Ducati Streetfighter V4 S
How to Replace the Front Brake Pads on a Ducati Streetfighter V4 S
Streetfighter V4 S To replace the front brake pads on a Ducati Streetfighter V4 S, loosen the bolts that secure the brake caliper to detach it from the brake disc. Once…
Replacing the Water Pump on a Ducati Streetfighter V4
Replacing the Water Pump on a Ducati Streetfighter V4
Streetfighter V4 S Below, we will discover the steps to remove and replace the water pump on a Ducati Streetfighter V4. First, place the bike on a stand and begin drain…

How to Replace the Battery in the Royal Enfield Classic 350?

Replacing the battery in the Royal Enfield Classic is an extremely simple and quick operation. First, ensure the key is not inserted for safety. Locate the small panel on the left side, then insert the key into the corresponding cylinder and unlock the lock. Once the panel is removed, unclip the various wiring clips, remove the fuse box, and take the battery out of its housing. Now, disconnect the terminals, connect them to the replacement battery, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos