Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the levers on the Ducati Streetfighter V4 S, you need to loosen the bolt that secures the pin at the end of the lever: this bolt is located at the bottom, and once loosened, you can slide the lever out of its seat, disconnecting the corresponding cable as well. Once the old lever is completely freed, you can insert the new one, connecting it to the corresponding cable; after connecting, position it inside its housing, insert the pin, and secure everything with the corresponding bolt.

Updated on 1 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the levers on the Ducati Streetfighter V4 S?
How do you replace the levers on the Ducati Streetfighter V4 S?
Streetfighter V4 S It will be possible to replace the levers of the Ducati Streetfighter V4 S by loosening the nuts that secure the levers to their housing: these nuts …
How to Replace the Front Brake Pads on a Ducati Streetfighter V4 S
How to Replace the Front Brake Pads on a Ducati Streetfighter V4 S
Streetfighter V4 S To replace the front brake pads on a Ducati Streetfighter V4 S, loosen the bolts that secure the brake caliper to detach it from the brake disc. Once…
Replacing the Water Pump on a Ducati Streetfighter V4
Replacing the Water Pump on a Ducati Streetfighter V4
Streetfighter V4 S Below, we will discover the steps to remove and replace the water pump on a Ducati Streetfighter V4. First, place the bike on a stand and begin drain…

How to Replace the Battery in the Royal Enfield Classic 350?

Replacing the battery in the Royal Enfield Classic is an extremely simple and quick operation. First, ensure the key is not inserted for safety. Locate the small panel on the left side, then insert the key into the corresponding cylinder and unlock the lock. Once the panel is removed, unclip the various wiring clips, remove the fuse box, and take the battery out of its housing. Now, disconnect the terminals, connect them to the replacement battery, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos