Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the engine oil in the Ducati Multistrada 1260?

Model: Ducati Multistrada 1260
Part: Engine oil

Video tutorial

In this tutorial, you will learn how to change the engine oil in the Ducati Multistrada 1260, an extremely simple and quick operation. First, ensure that the engine is cool enough to work safely, then remove the relevant lower cover and position a container underneath the bike.

Next, locate the drain hole bolt, unscrew it using an Allen key, and let all the oil in the system drain out. At this point, simply unscrew the old filter, tighten the replacement, reassemble everything, and add the required amount of oil through the designated upper hole.


Posted on 17 May 2026 by ScegliAuto


Related tutorials

How to Perform a Service on a Ducati Multistrada 1260 Enduro
How to Perform a Service on a Ducati Multistrada 1260 Enduro
Multistrada 1260 Here is the guide on how to perform routine maintenance by replacing the engine oil and oil filter on a Ducati Multistrada 1260 Enduro. First, remove…
Replace the air filter of the Ducati Multistrada 1260
Replace the air filter of the Ducati Multistrada 1260
Multistrada 1260 Let's briefly discover the instructions that will allow you to remove and replace the engine air filter of the Ducati Multistrada 1260 in simple and …
How to Replace the Coolant in the Ducati Multistrada 1260
How to Replace the Coolant in the Ducati Multistrada 1260
Multistrada 1260 Today, follow the step-by-step instructions on how to replace the engine coolant in the Ducati Multistrada 1260. First, place the bike on the centre …

How to replace the transmission oil in the KTM Exc 300

Today, let's discover how to carry out the routine maintenance service by replacing the transmission oil in the two-stroke enduro bike KTM Exc 300. First, place your bike on a stand and start by unscrewing the oil drain bolt located under the engine, allowing the gearbox oil to drain into a container for about ten minutes; then clean the small mesh oil filter, as shown in the video. At this point, unscrew the filler cap and top up with the new gearbox oil, the specifications of which are indicated in the owner's manual!

Watch the video!


by ScegliAuto

More videos