Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Ducati Monster 821
Part: Clutch

Below are the instructions for removing and replacing the clutch cable on the Ducati Monster 821. First, place the bike on a stand and begin loosening the clutch cable adjuster screw to disconnect it from the lever. Then, remove the rider's seat and follow the clutch cable that runs from the top of the engine, disconnecting it from the pedal adjuster as shown in the video. Remove the cable with its sheath and replace it with the new one; finally, adjust it at the adjusters.

Posted on 31 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Brake and Clutch Levers on the Ducati Monster 821
How to Replace the Brake and Clutch Levers on the Ducati Monster 821
Monster 821 In this brief and simple guide, follow the steps to remove and replace the brake and clutch levers on the Ducati Monster 821. First, place your motor…
How to Replace the Battery in a Ducati Monster 821
How to Replace the Battery in a Ducati Monster 821
Monster 821 On the Ducati Monster 821, the battery replacement procedure involves loosening the bolts that secure the protective cover of the unit, located insid…
Where is the battery located in the Ducati Monster 821?
Where is the battery located in the Ducati Monster 821?
Monster 821 This video shows where the battery is located in the Ducati Monster 821, useful in case you need to replace it, recharge it, or perform an emergency …

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos