Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil Replacement for Ducati Multistrada 1200S

Model: Ducati Multistrada 1200s
Part: Engine oil

Video tutorial

In today's tutorial, you will learn how to replace the engine oil in a Ducati Multistrada 1200S. First, position the motorcycle on its centre stand and remove the protective cover by unscrewing the fixing screws; then, unscrew the drain bolt located underneath and let the oil drain into a container for about twenty minutes.

At this point, also remove the oil filter, which is located nearby, by using the appropriate spanner.

Replace it with a new one, tightening it by hand, and pour in the new engine oil until it reaches the maximum level!


Updated on 22 April 2026 by ScegliAuto


Related tutorials

How to Replace the Remote Battery of the Ducati Multistrada 1200S?
How to Replace the Remote Battery of the Ducati Multistrada 1200S?
Multistrada 1200s To replace the battery of the remote for the Ducati Multistrada 1200S, press the button located on the top of the remote to lever it out of its housi…
How to Replace the Rear Brake Pads on a Ducati Multistrada 1200S?
How to Replace the Rear Brake Pads on a Ducati Multistrada 1200S?
Multistrada 1200s To replace the rear brake pads on a Ducati Multistrada 1200S, loosen the bolts that secure the brake caliper to the rear wheel disc. This will allow …
How do you replace the oil filter of the Ducati Multistrada 1200S?
How do you replace the oil filter of the Ducati Multistrada 1200S?
Multistrada 1200s It will be possible to perform the oil replacement of the Ducati Multistrada 1200S by loosening the drain plug located in the central lower part of t…

How to Change the Headlight Bulb on the Aprilia Scarabeo 50

In this short and simple guide, you will learn how to disassemble and replace the headlight bulb on the Aprilia Scarabeo 50 scooter, following the instructions below. First, place the scooter on the centre stand and begin by removing the plastic cover located in front of the instrument panel; to do this, unscrew the securing screws found underneath, as shown in the video. At this point, disconnect the electrical connector of the bulb to remove it, replacing it with a new one (with the same fitting); then reassemble the bulb and the optical unit!

Watch the video!


by ScegliAuto

More videos