Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the oil filter of the Ducati Multistrada 1200S?

Model: Ducati Multistrada 1200s
Part: Oil filter

Video tutorial

It will be possible to perform the oil replacement of the Ducati Multistrada 1200S by loosening the drain plug located in the central lower part of the vehicle: once this has been removed, it will be possible to proceed by collecting all the used oil inside a container.

The oil filter, located in the same position, can also be removed by inserting the new replacement piece: after replacing the filter, topping up can be done.

The necessary amount of oil must be poured through the vent on the right side of the bike.


Posted on 1 August 2025 by ScegliAuto


Related tutorials

Engine Oil Replacement for Ducati Multistrada 1200S
Engine Oil Replacement for Ducati Multistrada 1200S
Multistrada 1200s In today's tutorial, you will learn how to replace the engine oil in a Ducati Multistrada 1200S. First, position the motorcycle on its centre stand a…
How to Change the Engine Oil in a Ducati Multistrada 1200S?
How to Change the Engine Oil in a Ducati Multistrada 1200S?
Multistrada 1200s In this tutorial, you will see how to change the engine oil in a Ducati Multistrada 1200S, a very simple and quick operation. First, ensure the engin…
How to Replace the Remote Battery of the Ducati Multistrada 1200S?
How to Replace the Remote Battery of the Ducati Multistrada 1200S?
Multistrada 1200s To replace the battery of the remote for the Ducati Multistrada 1200S, press the button located on the top of the remote to lever it out of its housi…

How to Change the Engine Oil on a Benelli 150

To change the engine oil on a Benelli 150, ensure the bike is on a stable surface, using the centre stand to keep it upright. Before starting, it's helpful to run the engine for a few minutes to warm the oil and facilitate drainage. Turn off the engine and locate the drain plug situated under the engine. Using an appropriate spanner, loosen the plug and position a container underneath to collect the used oil. Allow it to drain completely, ensuring all the liquid is removed. Once emptied, carefully re-tighten the plug, avoiding overtightening. Using a funnel, slowly pour new oil into the tank, checking the level with the dipstick or inspection window. When the level is correct, start the engine for a couple of minutes to circulate the new oil, then turn it off and check the level again, topping up if necessary.

Watch the video!


by ScegliAuto

More videos