Do it yourself
Frequently asked questions about cars and motorcycles
To replace the front brake pads on a Ducati Monster, loosen the bolts securing the brake caliper to the brake disc. By unscrewing these bolts, you can detach the caliper from the disc, allowing the pads inside to be removed from their housing. Once the old pads are removed, insert the new ones and position the caliper back onto the disc. Secure the caliper to the disc by tightening the previously removed bolts and ensure the brake functions correctly.

Updated on 11 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Monster 1200 In this guide, you will find instructions to disassemble and replace the brake and clutch levers on a Ducati Monster 1200 motorcycle. First, place yo…
Monster 1200 Follow these instructions to remove and replace the battery of the Ducati Monster 1200 motorcycle. First, place the bike on its stand and start unscr…
Monster 1200 This guide outlines the steps to replace the engine oil and oil filter of the Ducati Monster 1200 S, performing routine maintenance. First, remove th…

How to Change the Engine Oil on a Ducati Hypermotard?

You can change the engine oil on a Ducati Hypermotard by loosening the drain plug located at the central lower part of the bike: once the plug is unscrewed, you can let the used oil flow completely into a container placed underneath. Once the plug has been removed, you can proceed by sliding the oil filter out of its seat to insert the new one; at this point, you can continue with the top-up, pouring the necessary amount of oil through the breather on the left side of the bike.

Watch the video!


by ScegliAuto

More videos