Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Ducati Monster 1200
Part:

In this guide, you will find instructions to disassemble and replace the brake and clutch levers on a Ducati Monster 1200 motorcycle. First, place your bike on a stand and begin unscrewing the fixing pin of the front brake lever using a socket spanner; remove and install the new lever, greasing the pin and adjusting the brake as shown in the video. Next, unscrew the pin of the clutch lever, disconnecting the cable; then reassemble the new lever, also performing the final adjustment here!

Updated on 26 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Clutch on a Ducati Monster 1200 S?
How to Replace the Clutch on a Ducati Monster 1200 S?
Monster 1200 In today's video, we will see step-by-step instructions to remove and replace the clutch discs along with the springs on a Ducati Monster 1200 S. Fir…
How to Replace the Battery of the Ducati Monster 1200
How to Replace the Battery of the Ducati Monster 1200
Monster 1200 Follow these instructions to remove and replace the battery of the Ducati Monster 1200 motorcycle. First, place the bike on its stand and start unscr…
How to Replace the Front Brake Pads on a Ducati Monster 1200?
How to Replace the Front Brake Pads on a Ducati Monster 1200?
Monster 1200 To replace the front brake pads on a Ducati Monster, loosen the bolts securing the brake caliper to the brake disc. By unscrewing these bolts, you ca…

How to Change the Speed Unit on the Piaggio Mp3

If the speed displayed on your Piaggio Mp3 is in a unit of measurement different from your preference, simply follow this mini guide to change it independently. First, start this procedure with the bike completely off. Then, press and hold the "Mode" button on the right knob for about three seconds and turn on the display. Once done, press the "Mode" button again to switch between units (from Km/h to Mph or vice versa). Finally, hold down "Set" to save the changes.

Watch the video!


by ScegliAuto

More videos