Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Remote Battery of the Ducati Multistrada

Model: Ducati Multistrada
Part: Key

Video tutorial

Briefly review the main instructions to disassemble and replace the battery of the Ducati Multistrada key remote. First, take the remote in hand and lever the sides to open it into two parts, accessing the circuit board and the battery; then remove the old battery and replace it with the new one of the correct type (with the same voltage).

Now insert the new battery in the correct orientation and finally reassemble the two halves of the remote, applying the reverse procedure!


Updated on 28 May 2026 by ScegliAuto


Related tutorials

How to Replace the Remote Control Battery on a Ducati Multistrada?
How to Replace the Remote Control Battery on a Ducati Multistrada?
Multistrada In this tutorial, you will see how to replace the battery in the remote control of a Ducati Multistrada, a very simple and quick operation. For this,…
How to Replace the Remote Battery of the Ducati Multistrada?
How to Replace the Remote Battery of the Ducati Multistrada?
Multistrada .. Replacing the remote battery of the Ducati Multistrada, as shown in this tutorial, is an extremely simple.. …
Replacement of the battery of the Ducati Multistrada key
Replacement of the battery of the Ducati Multistrada key
Multistrada In a few simple steps, we will see how to disassemble and replace the battery of the remote key for the Ducati Multistrada motorcycle. First, take th…

How to Change the Engine Oil in a Yamaha XMAX 300 Scooter?

In this tutorial, see how to change the engine oil in a Yamaha XMAX 300 scooter, a very simple and quick operation. First, ensure that the engine is cool enough to operate safely, then position a container underneath the scooter, locate the drain hole bolt, and unscrew it using a 12mm socket spanner. Allow all the oil in the system to drain out, then open the filter cap with an 8mm spanner and insert the replacement. At this point, simply reassemble everything and pour in the required amount of oil through the designated upper hole.

Watch the video!


by ScegliAuto

More videos