Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In today's video tutorial, see how to remove and replace the front brake pads on a Ducati Monster 600 in simple and quick steps. First, place the bike on a stand and start by removing the two clips of the brake pads using pliers. Then, remove the pins and subsequently the old pads, as shown in the video. At this point, lever the piston of the caliper back, cleaning the caliper of dirt; then install the new high-quality brake pads, following the video tutorial to the end!

Updated on 12 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Front Brake Pads on a Ducati Monster 600
Monster 600 In this video, see the steps to remove and replace the front brake pads on a Ducati Monster 600, as well as on the 750 and 900 models. First, remove …
How to Remove the Left Footpeg of a Ducati Monster 600
Monster 600 Before you can start, position your Ducati Monster 600 on the side stand. Begin by removing the left exhaust end can by unscrewing the relevant secur…
How to Replace the Rear Brake Pads on a Ducati Monster 600
How to Replace the Rear Brake Pads on a Ducati Monster 600
Monster 600 To replace the rear brake pads on a Ducati Monster 600, loosen the screws that secure the brake caliper to its housing. Once these screws are loosene…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos