Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Enfield Himalayan
Part: Clock

In this tutorial, we can see how to adjust the time on the Royal Enfield Himalayan 450, an extremely simple and quick operation to be carried out, for example, after disconnecting the battery or following the switch to daylight saving time. First of all, insert the key, then turn on the instrument panel and reach the settings menu by pressing upwards on the selector located on the left handlebar. Scroll through the various options, enter "System", "Clock", "Set Time", and adjust the clock as needed. To save the setting, simply return to the main screen.

Posted on 22 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to adjust the time on the Royal Enfield Himalayan?
How to adjust the time on the Royal Enfield Himalayan?
Himalayan In this tutorial we can see how to adjust the time on the Royal Enfield Himalayan, an extremely simple and quick operation, to be carried out for exa…
How to Change the Engine Oil in a Royal Enfield Himalayan 450?
How to Change the Engine Oil in a Royal Enfield Himalayan 450?
Himalayan In this tutorial, we will see how to change the engine oil in a Royal Enfield Himalayan 450, a very simple and quick operation. First, ensure the eng…
How to Replace the Clutch on the Royal Enfield Himalayan 450
How to Replace the Clutch on the Royal Enfield Himalayan 450
Himalayan In this brief guide, discover the instructions that will allow you to change the engine oil of the Royal Enfield Himalayan 450 motorcycle. First, pla…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos