Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Remove the air filter on an Enfield Interceptor 650 motorcycle. Follow this guide to proceed with the replacement. Position the motorcycle on a centre stand. Remove the seat from the motorcycle, then remove the coloured fairing covering the filter on the left side. Once the filter cover is removed, use a screwdriver to unscrew the securing screws of the air container. Fit a new one if damaged or reposition the same after cleaning it (use an air compressor). Finally, close the container with the air filter cover.

Updated on 9 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the air filter of the Royal Enfield Interceptor 650?
How do you replace the air filter of the Royal Enfield Interceptor 650?
Interceptor 650 In order to replace the air filter of the Royal Enfield Interceptor 650, you need to loosen the screws that secure the triangular panel on the right …
How do you replace the air filter of the Royal Enfield Interceptor 650?
How do you replace the air filter of the Royal Enfield Interceptor 650?
Interceptor 650 In order to replace the air filter of the Royal Enfield Interceptor 650, you need to loosen the screws that secure the triangular cover on the left s…
How to Replace the Air Filter in the Royal Enfield Interceptor 650?
How to Replace the Air Filter in the Royal Enfield Interceptor 650?
Interceptor 650 As shown in this tutorial, replacing the air filter in the Royal Enfield Interceptor 650 is an extremely simple and quick operation. First, wait for …

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos