Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Perform a Service on a Royal Enfield Classic 350

Model: Enfield Classic 350
Part: Engine oil

Video tutorial

In this guide, you will learn how to carry out the regular maintenance service by replacing the engine oil and oil filter on the Royal Enfield Classic 350. First, position the centre stand on your bike and start by removing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes.

Next, unscrew the screws securing the oil filter cover, remove the cartridge, and replace it with a new one; then fill the crankcase with oil of the correct grade!


Updated on 24 April 2026 by ScegliAuto


Related tutorials

Where to Find the Fuses on a Royal Enfield Classic 350
Where to Find the Fuses on a Royal Enfield Classic 350
Classic 350 In this guide for Royal Enfield Classic 350 owners, we will discover where all the various fuses are located. First, ensure the motorcycle is complet…
How to Replace the Battery of the Royal Enfield Classic 350?
How to Replace the Battery of the Royal Enfield Classic 350?
Classic 350 To replace the battery of the Royal Enfield Classic 350, open the cover located on the right side of the bike, near the seat. The cover can be opened…
How to Replace the Battery on a Royal Enfield Classic 350
How to Replace the Battery on a Royal Enfield Classic 350
Classic 350 To replace the battery on the Royal Enfield Classic 350, remove the cover located on the left side of the bike, just beneath the seat. You can open t…

How to Replace the Battery in a Harley-Davidson Sportster Iron 883?

In this tutorial, you will see how to replace the battery in a Harley-Davidson Sportster Iron 883, a very simple and quick operation. Before proceeding, ensure that the key is not inserted for safety. Start by unscrewing the single bolt securing the seat, then remove the left plastic cover by unlocking the relevant clips. Next, remove the 3 fuses, disconnect the 2 terminals starting with the negative, and unscrew the bolt of the mounting bracket. At this point, you can extract the old battery, insert the replacement, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos