Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the battery on the Royal Enfield Classic 350, remove the cover located on the left side of the bike, just beneath the seat. You can open the cover by turning the ignition key in the designated lock. Once removed, loosen the screws securing the battery in its housing and disconnect the terminals attached to it. You can then replace it with a new spare part, which should be secured and covered by the appropriate cover.

Updated on 17 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the Fuses on a Royal Enfield Classic 350
Where to Find the Fuses on a Royal Enfield Classic 350
Classic 350 In this guide for Royal Enfield Classic 350 owners, we will discover where all the various fuses are located. First, ensure the motorcycle is complet…
How do you replace the battery of the Royal Enfield Classic 350?
How do you replace the battery of the Royal Enfield Classic 350?
Classic 350 The battery installed on the Royal Enfield Classic 350 can be reset by opening the cover located on the right side of the motorcycle, near the seat. …
How to Replace the Battery of the Royal Enfield Classic 350?
How to Replace the Battery of the Royal Enfield Classic 350?
Classic 350 To replace the battery of the Royal Enfield Classic 350, loosen the screws securing the cover located on the left side of the bike, just below the fu…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos