Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the headlight bulb of the Fiat 500?

Model: Fiat 500 312 - Years 2007-2024
Part: Headlight bulb

The procedure for replacing the headlight bulb on the Fiat 500 involves opening the hood to access the internal components of the engine compartment: here it will be possible to locate the internal protective panel of the headlight assembly, which must be removed to access the bulb inside. The bulb must be disconnected from the connector so that a new one can be inserted; after installation, the headlight assembly must be closed again with the panel inside to ensure that everything works correctly.

Posted on 26 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulb of the Fiat 500 Abarth
How to Replace the Front Headlight Bulb of the Fiat 500 Abarth
Fiat 500 (2007-2024 / 312) Replacing a front headlight bulb on a Fiat 500 Abarth follows the same steps used for replacing a front headlight bulb on a Fiat 500 or Fiat 500 L. T…
How to Replace the Front Light Bulb on a Fiat 500?
How to Replace the Front Light Bulb on a Fiat 500?
Fiat 500 (2007-2021 / ) To replace the front light bulb on a Fiat 500, access the inner cover of the wheel arch corresponding to the bulb that needs replacing. Here, you wil…
How to Replace the Front Headlamp Bulb on a Fiat 500?
How to Replace the Front Headlamp Bulb on a Fiat 500?
Fiat 500 (2007-2022 / ) To replace the front headlamp bulb on a Fiat 500, open the bonnet to access the screws securing the headlamp from the top. You may also need to detac…

Other guides you may be interested in

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos