Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Light Bulb on a Fiat 500?

Model: Fiat 500 - Years 2007-2021
Part: Light bulb

To replace the front light bulb on a Fiat 500, access the inner cover of the wheel arch corresponding to the bulb that needs replacing. Here, you will find a small cover that must be removed to access the bulb located at the back of the light. This will allow you to extract the bulb from its housing and disconnect it from the connector. Connect the new bulb to the connector and then insert it back into the light. After replacement, close everything with the cover inside the wheel arch.

Updated on 5 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulb of the Fiat 500 Abarth
How to Replace the Front Headlight Bulb of the Fiat 500 Abarth
Fiat 500 (2007-2024 / 312) Replacing a front headlight bulb on a Fiat 500 Abarth follows the same steps used for replacing a front headlight bulb on a Fiat 500 or Fiat 500 L. T…
Dismantling Front Headlight Bulb of Fiat 500
Dismantling Front Headlight Bulb of Fiat 500
Fiat 500 (2007-2021 / 312) In the following tutorial video, you will see how to dismantle and replace the front headlight bulb of a Fiat 500. First, open the car's bonnet: then…
How to replace the front headlight bulb of the Fiat 500
How to replace the front headlight bulb of the Fiat 500
Fiat 500 (1957-1975 / Epoca) Replacing the front right headlight bulb of a vintage Fiat 500 is a simple and quick operation, although it may be thought to be more difficult due t…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos