Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the battery of a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Battery

Thanks to today's video tutorial, you will be able to see the entire step-by-step procedure for changing the battery on your Fiat Panda, model 169 produced from 2003 to 2012. Let's start the procedure by opening the engine compartment, then we disconnect the negative terminal cable and then, with a 10mm wrench, we disconnect the positive terminal cable as shown in the video. Once this is done, we take a 13mm wrench and unscrew the screw of the battery fixing plate to remove it, finally we insert a new battery and follow the reverse procedure to reassemble everything.

Posted on 4 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Driving Mode on a Fiat Panda 3
How to Change the Driving Mode on a Fiat Panda 3
Fiat Panda (2012-2026 / 319, MK 3) Today, learn how to change the driving mode on a Fiat Panda 3. To change the driving mode, rotate the dial to the right to engage the "OFF ROAD" mode…
How to Change the Ignition Coil on a Fiat Panda
How to Change the Ignition Coil on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Changing the ignition coil on a Fiat Panda? Let's see how to remove it. Pull the lever to open the engine compartment located at the bottom left of t…
How to Change the Thermostat on a Fiat Panda
How to Change the Thermostat on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Changing the thermostat valve on a Fiat Panda? Let's see how to remove it from the engine bay. Open the front bonnet, locate the parts to be removed.…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos