Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Ignition Coil on a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Ignition coil

See other generations:
Video tutorial

Changing the ignition coil on a Fiat Panda? Let's see how to remove it. Pull the lever to open the engine compartment located at the bottom left of the dashboard and lift the front bonnet, securing it. The coils are located under the soundproofing panel of the engine (remove it). Unscrew the screws of the control unit next to the battery with a suitable screwdriver, then remove it to access the coil.

Unscrew the screws of the coil and take it out by hand.

Take the new coil and insert it into the engine compartment, connect the power terminal and tighten the screws.


Updated on 28 March 2026 by ScegliAuto


Related tutorials

How to Replace the Spark Plugs on a Fiat Panda?
How to Replace the Spark Plugs on a Fiat Panda?
Fiat Panda (2003-2012 / 169, MK 2) To replace the spark plugs on a Fiat Panda, open the bonnet to access the engine bay and remove the plastic cover from the top. Once removed, disconn…
How to Change the Driving Mode on a Fiat Panda 3
How to Change the Driving Mode on a Fiat Panda 3
Fiat Panda (2012-2026 / 319, MK 3) Today, learn how to change the driving mode on a Fiat Panda 3. To change the driving mode, rotate the dial to the right to engage the "OFF ROAD" mode…
How to Change the Thermostat on a Fiat Panda
How to Change the Thermostat on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Changing the thermostat valve on a Fiat Panda? Let's see how to remove it from the engine bay. Open the front bonnet, locate the parts to be removed.…

Other guides you may be interested in

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos