Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Panda
    4. : How do you replace the Fiat Panda spark plugs?

Fiat Panda - Video tutorial

Model: Fiat Panda MK 2, 169 - Years 2003-2012
Part: Spark plugs
Operation: How do you replace the Fiat Panda spark plugs?

To be able to replace the spark plugs on the Fiat Panda, you need to open the hood to gain access to the engine compartment and remove the plastic cover from its upper part. Once this has been removed, it will be possible to go and disconnect all the cables connected to the coil and move the latter, in order to have access to the spark plugs. These must be removed from their housing by using a socket wrench to extract them. Once they have been removed, it will be possible to insert new spare parts which must be properly connected to the coil.


Posted on 19 March 2024 by ScegliAuto

    Frequently Asked Questions

    • Panda 2012-2021 - How to replace the spark plugs in the Fiat Panda? Read Answer
    • Panda 2003-2012 - How often are the spark plugs on the Fiat Panda natural power changed? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos