Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the spark plugs of the Fiat Panda

Model: Fiat Panda - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Spark plugs

See other generations:
Video tutorial

In this video, we see how to replace the spark plugs of a Panda MK3: first of all, once the hood is open, we need to remove the air filter box, including the tube inside, because the spark plugs are located right under this component. Once exposed, we remove the rubber cap, inside which there is the connection to the coil, and expose the spark plug, to remove which we need a specific wrench, and a lot of attention to avoid the spark plug from falling into the engine; we repeat the same work for the other three spark plugs and then place the new ones in their place, always with great care.

We reconnect the caps and then put the air filter back in place.


Posted on 11 May 2025 by ScegliAuto


Related tutorials

How to Replace the Spark Plugs on a Fiat Panda
How to Replace the Spark Plugs on a Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) Today, discover the instructions for removing and replacing the spark plugs on a Fiat Panda. First, open the engine bonnet and remove the air filter …
How to Change the Spark Plugs on a Fiat Panda
How to Change the Spark Plugs on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) In this video, remove the spark plugs from a Fiat Panda. Open the engine bay, lift the front bonnet, secure it, and disconnect the battery terminals.…
How to Change the Spark Plugs of the Fiat Panda Twin Air
How to Change the Spark Plugs of the Fiat Panda Twin Air
Fiat Panda (2012-2026 / 319, MK 3) In today's tutorial video, you will learn how to remove and replace the spark plugs of the engine in the Fiat Panda Twin Air, which has a twin-cylind…

Other guides you may be interested in

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos